Galvanised Secure Chemical Storage Unit - 560 Litre Sump Capacity
Galvanised secure unit for the containment and storage of chemicals, hazardous materials or waste, oil drums, and IBC units. Can act as secondary containment unit when dealing with oil, chemicals, and hazardous substances to limit accidental spills and contamination.
- Hazardous and Chemical Stores to meet all your storage needs
- Designed for the safe storage of small and large quantities of oil drums, IBCs, hazardous, flammable or chemical liquids
- Manufactured in accordance with Pollution Prevention Guidelines 26 regulations as per the requirement of the Environmental Agency
- Galvanised units
- Side and roof panels are manufactured from 0.6mm cold rolled corrugated galvanised steel
- Structural frame fitted at each end and centre of unit to provide additional strength
- External size: 2198mm(h) x 2928mm(w) x 2184mm(d)
- Internal size: 1935mm(h) x 2840mm(w) x 2018mm(d)
- Sump capacity: 560 litres
- Sump is made from 2mm structural grade galvanised steel and is fitted with base plinths to keep the underside of the units out of contact with the ground
- Double doors fitted with 3 upper and 3 lower vents in each door
- Double doors located on short sides of the unit and secured with a Kale mortis lock with cylinder (152R)
- Unit is supplied complete with two sets of shelves on each of the long sides
- Shelf load capacity: 60kg UDL
- Fork lift pockets fitted on underside of units
- Unit should be positioned on a solid level surface, ideally concrete of circa 150mm in depth and 100mm bigger overall than the unit - the purpose of this is to ensure the unit does not settle unevenly when loaded
Please note: This unit will be delivered by an articulated vehicle, therefore please ensure that a vehicle of this size can access your premises before ordering and advise us accordingly. An appropriate size-capacity fork lift truck or Hiab unit is required to offload this item from the delivery vehicle. Standard delivery does not include the offloading - please call for details