Flood Guard Drain Sealers

Flood Guard Drain Sealers

SKU CPP21000054
UOM Each

Flood guard drain sealer for installation in plugs and drains to prevent any back-flow of water during flooding or blocked sewers. Simple to fit and easy to maintain.

  • Choose from 2 models to suit different pipe sizes
  • Allows normal water flow
  • When pipe becomes blocked the float will rise to the top to block off the plug or drain
  • For use in vertical pipes


Price £29.20


Included Products

Details

Flood Guard Drain Sealers

The flood guard drain sealer can be installed in domestic or commercial building drains and plugs to stop the back-flow of water when flooding takes place or when sewerage systems become blocked.

Specifications and Sizes
  • Choose from 2 models to suit different pipe sizes:
    • Flood Guard Drain Sealer - 2 inch - to suit 50mm pipe
    • Flood Guard Drain Sealer - 3 inch - to suit 75mm pipe
  • Gaskets are made of moulded rubber, and all metal parts are plated or stainless steel.
  • Drain sealer should only be installed vertically
How Flood Guard Drain Sealers Work

Flood-Guard operates like a check valve to seal off water back-up caused by overloaded sewers. Water flows normally through the drain until the sewer begins to back up. The Flood-Guard float then rises to seal off the drain opening until the water recedes.

Installation

A screwdriver and a couple of minutes are all you need to install a Flood-Guard. Remove the strainer or plug cover if present and push flood guard directly into pipe (oil or grease can be used to assist). Be sure float is screwed on tightly. Once in place, it can prevent property damage and a very messy clean-up job. Please note: the flood guard should be cleaned regularly to make sure that float moves freely.

For extreme, extended pressure (for instance, where home-made seals have popped out of the line,) we can also supply standpipe models. Please call for details

Delivery Information

Free UK Mainland Delivery is available on this item


Outlying Areas

A £5 Delivery Surcharge applies to postcodes: TR1-27 and some areas of rural wales.

A £15 Delivery Surcharge applies to postcodes: FK8, FK17-21, IV1-28, IV30-32, IV36, IV40, IV52-54, IV63, KW1-3, KW5-14, PA20-24, PA26-38, PA80, PH15-26, PH30-41, PH49-50.


Non UK Mainland

For delivery to non UK Mainland addresses please contact us on 0808 239 7985 for a quoted delivery price.

BT1-94, GY1-10, HS1-9, IM1-9, IV41-51, IV55-56, JE1-5, KA27-28, KW15-17, PA41-42, PA44-49, PA60-78, PH41-44, PO30-41, TR21-25, ZE1-3.

You Might Also Like

Hydrosack Flood Protection

FSAC030

£19.55


Flexible Drain or Toilet Plug

CPP21000055

£52.67